YC360.C系列重量变送器适用于称重点多，控制柜空间有限的工业称重场合。可将称重信号实时转换为标准工业通讯信号，集现场显示与远程传输于一体，同时兼具定量控制功能，广泛适用于冶金，化工，建材，混凝土，饲料等行业。
YC360. C
series weight transmitter is suitable for those have multiple weighing nodes
and limited cabinet space industrial occasions. The real-time weighing signal
can be converted into standard industrial communication signals, integrating
field display and remote transmission, quantitative control and set-point
comparison at the same time, widely used in metallurgy, chemical industry, building
materials, concrete, feed and other industries.
技术规格 Specification:
|
外形结构 Enclosure |
面板式结构。面板：SS304，IP65；腔体：铝合金（阳极氧化） Panel Mount. Front plate: SS304, IP65. Case: Anodized Aluminum |
||
|
工作模式 Run Mode |
双速定量模式，预置点比较模式 2-speed material transfer mode, Setpoint comparison |
||
|
传感器信号 Signal Range |
-20mV~+20mV |
分度值 Increments |
1,2,5 x 10n (n=-3 ~1) |
|
分辨力 Max. Sensitivity |
0.5uV/d |
最高显示精度 Max. Resolution |
1/50,000 |
|
增益漂移 FS Drift |
3ppm/°C |
非线性 Linearity |
0.003%FS |
|
AD刷新率 AD Refresh Rate |
200Hz |
传感器负载 Cells Load |
4只350欧姆传感器 Four (4) 350 ohm load cells |
|
显示 / Display |
6位0.4寸红色LED，6位0.28寸黄绿色LED，10位LED光柱 6-digit 0.4’ segment LED, 6-digit 0.28’segment LED, 10-bit LED light bar |
||
|
键盘 / Keypad |
4只轻触薄膜按键 4 Flat switch membrane with tactile-feel keys; polyester overlay |
||
|
开关量 Discrete I/O |
1xDI,4xDO(带过载保护) 1 Inputs; 4 Outputs(24VDC @500mA with over-load protection) |
||
|
通讯接口 / USART |
COM1: RS232 / RS485 |
||
|
串口通讯协议 Serial Protocol |
MODBUS-RTU、命令、打印、连续输出 MODBUS-RTU, Command output, Print, Continuous Output |
||
|
选件 / Option |
C2: 4~20mA/0~10V; C3: PROFIBUS DP |
||
|
电源/ Power Supply |
18~30VDC, 160mA |
||
|
工作环境 Operating Temperature |
-10°C ~ +40°C，相对湿度：10%~90%，不冷凝 -10°C ~ +40°C，Relative humidity:10%~90%，non-condensing |
||
首页
电话
邮箱