YC360L系列通用型称重显示控制器具备工业称重应用所需要的各种基本控制功能，并可将称重信号实时转换为标准工业通讯信号，集现场显示与远程传输于一体，广泛适用于冶金，化工，建材，饲料，食品饮料，纺织，实验室，材料分析等行业。
YC360L series general weighing controller is embedded with all kinds of basic weighing setpoint control sequences. This feature makes it possible to be applied in most industrial weighing fields with economical cost spending. The real-time weighing signal can be converted into standard industrial communication signals, integrating field display and remote transmission, quantitative control and setpoint comparison at the same time, widely used in metallurgy, chemical industry, building materials, feed, textile, labs, material force analysis and other industries.
产品尺寸图 Dimensions(mm):
面板式外形尺寸（mm）：110×62×92.5，开孔尺寸(mm) : 46×93 
|
外形结构 Enclosure |
面板式结构，面板：铝合金，IP65；腔体：铝合金 Front plate: Aluminum , IP65. Case: Aluminum |
||
|
工作模式 Run Mode |
双速定量模式，预 Panel Mount,置点比较模式，上下限报警，检重控制，减量控制，峰值测力，毛/净灌装 2-speed material transfer mode, Setpoint comparison，Over/under, Check weigh，Reduction weigh，Peak force measurement，Gross/net fill |
||
|
传感器信号 Signal Range |
-20mV~+20mV |
分度值 Increments |
1,2,5 x 10n (n=-3 ~1) |
|
分辨力 Max. Sensitivity |
0.5uV/d |
最高显示精度 Max. Resolution |
1/50,000 |
|
增益漂移 FS Drift |
3ppm/°C |
非线性 Linearity |
0.003%FS |
|
AD刷新率 AD Refresh Rate |
100Hz |
传感器负载 Cells Load |
4只350欧姆传感器 Four (4) 350 ohm load cells |
|
显示 / Display |
7位0.4寸红色LED 7-digit 0.4’ segment LED |
||
|
键盘 / Keypad |
4只轻触按键 4 tactile-feel keys; polyester overlay |
||
|
开关量 Discrete I/O |
2xDI,3x Relay DO 2 Inputs; 3 Outputs(220VAC @ 5A) |
||
|
通讯接口 / USART |
COM1: RS232; COM2: RS485 |
||
|
串口通讯协议 Serial Protocol |
MODBUS-RTU、命令、连续输出 MODBUS-RTU, Command output, Continuous Output |
||
|
选件 / Option |
4~20mA/0~10V，Profibus DP |
||
|
电源/ Power Supply |
18~30DCV, 60mA |
||
|
工作环境 Operating Temperature |
-10°C ~ +40°C，相对湿度：10%~90%，不冷凝 -10°C ~ +40°C，Relative humidity:10%~90%，non-condensing |
||
首页
电话
邮箱